How to Make Your Own Bulletin Board

Organization can be beautiful as well as functional. I bought a matching pair of pictures at a thrift store with the intention of using the frames to make bulletin boards. Here’s a sneak peek at the first one.

P1010065

 

The frame was in great shape, but the green and gold needed to go.

 

P1000997

 

Kilz latex primer to the rescue. Use a couple of coats of primer- don’t worry too much about complete coverage. Distress as much as you’d like with a fine grit sand paper- I use a sponge sanding block. Add a coat of polycrylic and let dry. Then apply glaze and wipe off as much or as little as you’d like to get the finish you want. There’s no right or wrong here- it’s all about what look you want for your project.

You’ll notice I didn’t add paint over the top of the primer. As I mentioned in my end table project,  the primer looks a lot like chalk paint and since I’m putting polycrylic on top, I decided to go with it.

 

P1010052

 

I didn’t take pictures of the glazing and finishing steps, but it’s the same process as the end table project mentioned above. After glazing, add another coat of polycrylic. Next, you’ll need a cork board. Have you noticed how expensive cork is? Yikes! Back to the thrift store!

 

P1010075

 

Remove the cork board from the frame and cut down to size if needed. I used my RotoZip, but it was probably over kill for this project. The cork boards are really flimsy so I think you could use an exacto knife just fine.

 

Next, cut a piece of drop cloth a few inches larger than your cork board. You don’t need yours to overlap like mine. I had thought I would need to make the back look nicely finished, but I ended up covering it with a piece of cardboard once it was in the frame. I wrapped the fabric over the cork board and taped it to the back temporarily, in case I messed it up and needed to start over. Not that I ever mess things up and need to start over. Mmm-hmmm.

 

P1010062

 

I love Graphics Fairy and knew I wanted to use some of her graphics on this project. I used this French typography for the header and parts of this iron scrollwork.

*For any graphic with words, you’ll need to flip the image. I use Publisher, but any photo editing software should be able to do it. Print them on a laser printer or copier.

Arrange them face down on your fabric and tape into place. Use a cotton ball and rub CitraSolv concentrate over the paper. Below you can see the header is done and I’ve just applied the CitraSolv to the top graphic. Carefully peel up the paper to see if the graphic has transferred to your liking. If not, apply more CitraSolv. Be very careful not to shift your pattern. If you like a nice crisp graphic, this probably isn’t the method for you. It will look worn and faded, but you could use a paint pen to sharpen the image. Me? I go for easy, so I leave it as is.

 

P1010058

 

I’ve used this process before without any problems, but this time the CitraSolv left a ring around the graphics. See? I never mess anything up. ~sigh~

 

P1010061

 

What to do? I added a little CitraSolv to another cotton ball and went lightly over the rest of the fabric. Whew, it worked! Hot glue the fabric into place on the back, pop it into the frame, add a cardboard backing if needed and staple into place.

Close-up of the header:

 

P1010066

 

Distressing and glazing detail:

 

P1010068

 

Another look at the new bulletin board:

 

 

P1010065

 

I love how it turned out. Now to decide what to do with the other frame. Another cork board? Magnetic board? Chalk board?

What would you use to make your own bulletin board?

Doodles,

 

 

Partying here:

   Skip To My Lou      Sumo's Sweet Stuff      Knick of Time Interiors

beforeAndAfterButton   Todays Creative Blog   The Stuff of Success        

   Classy Clutter      DIY Show Off Project Parade  

Comments

  1. This really turned out Very lovely and vintage looking! Great save with the citra solv!:) It really does look wonderful!

  2. Your bulletin board looks awesome! I too have tried the Citrasolve with mixed results. I just recently posted about how to transfer photos and text to fabric or canvas. Let me know if you decide to give it a try.
    http://hookedondecorating.com/how-to-guide-transfer-photos-to-canvas/

    Carrie from Hooked on Decorating

  3. I would do a Magnetic Chalk board.

  4. Your bulletin board looks awesome! I too have tried the Citrasolve with mixed results. I just recently posted about how to transfer photos and text to fabric or canvas. Let me know if you decide to give it a try.
    http://hookedondecorating.com/how-to-guide-transfer-photos-to-canvas/

    Carrie from Hooked on Decorating

  5. This is lovely! For the other… Maybe something with glass over so you can do write on-wipe off without having the nasty, shiny, white board?

  6. Gorgeous, Sheila! This is definitely something I would be drawn to! If I find anymore frames, I’m going to have sell stuff because I have no more wall space to hang a corkboard, chalkboard or magnetic board {and I have at least one of each in this house!}.

  7. Super cute! Where do you get the citrasolv?

  8. Turned out great! Way to problem-solve ;)
    Thanks so much for linking up!
    igottacreate.blogspot.com
    “Kiss Me I’m Irish” linky party now open

  9. This turned out beautifully! I love how the frame turned out as well as the graphics! Thanks for the tutorial! Hopped over from Knick of Time Tuesday…

  10. I have two daughters who would be adorning that with photos of lovely French sites. But it is so pretty, I am not sure I could cover it!

  11. Pie Coyle says:

    Wow I love this. Would look great in my new laundry room/sewing room

  12. Love this…great tutorial! I think I will make that today~
    Bristol

  13. Love that fabric that you chose!
    Morgan recently posted..Apple Pie Pops

  14. Love this! I found you through Sarah’s Link Party. I have a question though… how did you print out the graphic with the words and still put it face down and not have it come out backwards? I’m sure I’m missing something simple but I can’t figure it out! lol.

    • Oops! Sorry, Amanda, I did have to flip the image. I use Microsoft Publisher to flip and resize images. I know you can do it in Word 2007 also, but not sure about earlier versions. Any photo editing software should be able to do it. Hope this helps! I’ll go edit my post now. :)

  15. Sheila,

    What an awesome idea. I love the faded image and how it turned out! Thanks for the inspiration.

    blessings,
    karianne
    thistlewood farm recently posted..The Twirly Whirly Skirt

  16. Love it, so pretty. I haven not tried the Citrasolve method, but hear good things about it. Love the graphics you choose. So very pretty. Thanks for sharing your creative inspiration at Sunday’s Best.

  17. Sheila, this is wonderful! I have used CitraSolv and it left no rings! Did I rub off on you? The Lacquer thinner transfers leave rings for me! LOL! We’ll have to get together and try this with each other! This is great and I love the idea! I have several old cork boards waiting in the garage- you’ve given me a great idea of what I should make with them.
    Betsy(@coastal-colors) recently posted..Amazing!

  18. Wow, super cute! I love it.
    Allison @ House of Hepworths recently posted..More Progress: new hardware in the guest bathroom

  19. Sharon @ Elizabeth & Co. says:

    Oh how pretty! What a beautiful transformation!

  20. I’m a big fan of all things frenchy. Love your bulletin board.

  21. Love the board! What a great job…thanks for the DIY…officially a follower! stop on by my place and join me on my adventures too if you like! Happy Monday!

  22. Gretchen DeKalb says:

    I bought a vintage frame wanting to make it into a bulletin board as well. Where did you get the cork part to cover with fabric? I don’t understand that process (where you got it and how you put it in the frame because my frame doesn’t have a back).

    • Gretchen, I bought a cork board at a thrift store and cut it down to size. The cork is already attached to backing. I added a piece of cardboard behind this cork board to hide the raw edges of the fabric, but it probably isn’t necessary. You can either hot glue the covered board into place, staple it, or use window glazing points (found at Lowe’s or Home Depot). I showed how to use the glazing points here: http://plumdoodles.com/2012/08/13/how-to-secure-artwork-in-a-frame/
      Hope this helps, I’ll be glad to answer any other questions you might have. :)

Trackbacks

  1. [...] (That’s my genius graphic for the wind.) Not to be discouraged, I highlighted my bulletin board in a little spring vignette on our entry [...]

  2. [...] I saw this bee hive graphic from Graphics Fairy, I knew I had to use it for this project. I transferred the image using CitraSolv onto a scrap of drop cloth fabric. I cut 2 strips of fabric from one of hubby’s shirts as well as [...]

  3. [...] the bulletin board I made? Well, I used parts of the same graphic from Graphics Fairy for this project. Print the [...]

  4. [...] the drop cloth covered bulletin board I made? That frame was actually one of a pair and I finally got around to using the second one for [...]

  5. [...] still love the French graphic bulletin board hanging over the [...]

  6. [...] them.  I liked the shape of this frame and decided to make a smaller version of my previous diy bulletin board, with a few changes. For this board, I also made some blinged-up pins for attaching daydreams and [...]

  7. [...] Large bulletin board & small bulletin board: [...]

  8. [...] of framed metal pieces to hang over our little entry table. I needed something to replace the diy bulletin board that I sold at the October market. Yeah, I’m very quick with my decorating. Anyway, I thought [...]

Speak Your Mind

*

CommentLuv badge